- Athene Type 12, 300 Mesh Thick Bar/Thin Bar TEM GridsThick bar/thin bar grids. 300 mesh, 3.05mm diameter. Copper, Nickel, Platinised or Gilded.Average lead time: 1 day
From £12.76
Average lead time: 1 day - Athene 1000um Single Hole TEM GridsSingle 1000μm hole grids, 3.05mm diameter. Copper, Nickel, Platinised or Gilded.Average lead time: 1 day
From £10.26
Average lead time: 1 day - Athene Type 7, 200 Mesh Thin Bar TEM GridsThin bar grids for high transmission. 200 mesh, 3.05mm diameter. Copper, Nickel, Platinised or Gilded.Average lead time: 1 day
From £22.41
Average lead time: 1 day - Gold on Carbon AGS1969 - High Resolution Test SpecimenHigh resolution test specimen with a particle size range from approximately 3 - 50nm.Average lead time: 1 day
From £96.34
Average lead time: 1 day - Calibration Specimens on Ultra Thin SubstratesA range of gold on silicon and tin on silicon specimens specifically developed for use in conjunction with line width calibration wafers or other test systems where the height of a conventional specimen is a problem.Average lead time: 1 day
From £84.36
Average lead time: 1 day - Gold on Carbon AGS168Z - Low Voltage Resolution Test SpecimenLow voltage resolution test specimen with a particle size range from approximately <30 - 300nm.Average lead time: 1 day
From £76.96
Average lead time: 1 day - Lacey carbon films on Nickel TEM GridsLacey carbon films are similar to the holey carbon films in that they have open areas but because of the fine lacey mesh structure they offer a greater percentage of open area in comparison.Average lead time: 1 day
From £64.58
Average lead time: 1 day - Holey carbon films - NickelHoley carbon films have many uses in microscopy but for certain applications the mesh sizes of standard TEM grids are too large to support the sample. NickelAverage lead time: 1 day
From £68.46
Average lead time: 1 day - Formvar films - NickelFormvar coated grids without a carbon layer are suitable for TEM applications up to 100kV. NickelAverage lead time: 1 day
From £35.89
Average lead time: 1 day - Formvar Films - GoldFormvar coated grids without a carbon layer are suitable for TEM applications up to 100kV. GoldCall for leadtime
From £40.32
Call for leadtime - Formvar Carbon Films on GoldThin cast films of Formvar strengthened with the addition of a layer of evaporated carbon on gold grids.Average lead time: 1 day
From £34.47
Average lead time: 1 day - Square Pattern 200 Mesh Centre Mark TEM Support Grids200 mesh, square pattern, 3.05mm diameter TEM grids with centre mark. Available in Copper, Nickel & Gold.Average lead time: 1 day
From £8.43
Average lead time: 1 day - Athene Type 3, 150 Mesh Standard Square Pattern TEM GridsStandard square pattern grids, 150 mesh, 3.05mm diameter. Copper, Nickel, Platinised or Gilded.Average lead time: 1 day
From £13.85
Average lead time: 1 day - Athene Type 6, 400 Standard Square Pattern TEM GridsStandard square pattern grids, 400 mesh, 3.05mm diameter. Copper, Nickel, Platinised or Gilded.Average lead time: 1 day
From £18.15
Average lead time: 1 day - Athene AEI Round Hole TEM GridsRound hole grids, 330 mesh, 35μm diameter holes, 3.05mm diameter. Copper, Nickel, Platinised or Gilded.Average lead time: 1 day
From £17.54
Average lead time: 1 day - Athene 483 Round Hole TEM GridsRound hole grids, 180 mesh, 100μm diameter holes, 3.05mm diameter. Copper, Nickel, Platinised or Gilded.Average lead time: 1 day
From £21.51
Average lead time: 1 day - Athene 2mm x 60um Slot TEM Grids2mm x 60μm slot TEM grids, 3.05mm diameter. Copper, Nickel, Platinised or Gilded.Call for leadtime
From £14.36
Call for leadtime - Athene 2mm x 1000um Slot + Bar TEM Grids2mm x 1000μm slot + bar TEM grids, 3.05mm diameter. Copper, Nickel, Platinised or Gilded.Average lead time: 1 day
From £14.59
Average lead time: 1 day - Athene 2mm x 500um Slot TEM Grids2mm x 500μm slot TEM grids, 3.05mm diameter. Copper, Nickel, Platinised or Gilded.Average lead time: 1 day
From £12.00
Average lead time: 1 day - Athene 2mm x 1000um Slot TEM Grids2mm x 1000μm slot TEM grids, 3.05mm diameter. Copper, Nickel, Platinised or Gilded.Average lead time: 1 day
From £13.81
Average lead time: 1 day - Athene Thick 2mm x 1000um Slot TEM GridsDouble thickness, 1000µm slot TEM grids, 3.05mm diameter. Copper, Nickel, Platinised or Gilded.Average lead time: 1 day
From £28.33
Average lead time: 1 day - Athene 200um Single Hole TEM GridsSingle 200μm hole grids, 3.05mm diameter. Copper, Nickel, Platinised or Gilded.Average lead time: 1 day
From £10.52
Average lead time: 1 day - Athene 800um Single Hole TEM GridsSingle 800μm hole grids, 3.05mm diameter. Copper, Nickel, Platinised or Gilded.Average lead time: 1 day
From £14.36
Average lead time: 1 day - Athene 2000um Single Hole TEM GridsSingle 2000μm hole grids, 3.05mm diameter. Copper, Nickel, Platinised or Gilded.Average lead time: 1 day
From £16.41
Average lead time: 1 day
